A slow drain is a warning. By the time it's a complete blockage, you're losing use of your kitchen, bathroom, or laundry room entirely. Masters Plumbing Service's drain techs in Wallace, NC use hydro-jetting equipment rated to 4,000 PSI and CCTV pipeline cameras to locate, clear, and document the obstruction — not just temporarily push it further down the line.
📞 Call +1-855-718-1500 — Book Today
Retail drain products and inexperienced plumbers share one problem: they treat the symptom, not the cause. Our approach combines the right equipment with the right diagnostic process.
Hydro-jetting is the only method that restores full pipe diameter. A cable auger punches through a blockage; a jetter removes the blockage material from the pipe wall entirely, significantly extending the interval before the next cleaning is needed.
Before recommending any clearing method, we run a push-rod camera into the drain to visually confirm blockage type and location. Grease accumulation 30 feet in looks different from a root ball at a joint or a collapsed section — and each requires a different response.
We clear kitchen drains, bathroom sink and shower drains, floor drains, laundry drains, and main sewer lines. Our equipment scales from a 1/2" kitchen drain line to a 6" commercial main — same certified technician, same professional-grade tools.
Our written service report notes the blockage type, location, method used, and any structural observations from the camera run. You walk away knowing the state of your drain system, not just that the water is flowing again.
From a slow bathroom sink to a full main-line stoppage affecting every fixture in the house, our drain techs in Wallace, NC have the equipment and training to clear it.
Kitchen drains accumulate FOG — fats, oils, and grease — that solidifies on pipe walls and progressively narrows the line. We use a combination of a cable auger to break the initial plug and a hot-water hydro-jet pass to scour the residual grease film. For commercial kitchens, we also service grease interceptors and document cleaning for inspection records.
Chronic slow bathroom drains often point to a partially closed p-trap, a buildup on the overflow plate mechanism, or a drain arm pitched incorrectly. We clear the immediate clog and identify if a mechanical fix is needed to prevent fast recurrence.
When multiple fixtures are draining slowly or backing up simultaneously, the blockage is typically in the main sewer line — the 4" or 6" pipe that carries all household waste to the municipal main or septic system. We access the main line through the cleanout, run a CCTV camera to identify the obstruction type, then clear with a sectional cable machine or hydro-jetter depending on what we find.
Floor drain traps can dry out and allow sewer gas into the structure if the drain isn't used regularly. We clear blockages, re-water the trap, and can install a trap primer if the drain is prone to drying in Wallace's climate.
A preventive jetting program documented over multiple visits gives you both clean pipes and a camera record of pipe condition over time — useful for catching structural deterioration before it causes an emergency.
Sometimes the question isn't just "why is this draining slowly" but "what is the actual condition of this pipe system." We run a recorded CCTV inspection with distance markings and provide a written report noting blockage types, root intrusion points, joint offsets, pipe material, and any visible structural defects.
We don't show up and start snaking blind. Our approach uses a camera-first diagnostic protocol to confirm what we're clearing before selecting the method.
Tell our dispatcher which fixtures are affected — one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
Before clearing anything, we run a CCTV camera into the line to see blockage type, location, and pipe condition. This prevents treating a structural pipe failure with a jetting pass that won't hold.
Based on the camera findings, we present you with a flat-rate quote and explain exactly which method we're using — electric auger, hydro-jet, root cutter — and why. No work begins until you approve.
After clearing, we run the camera a second time to confirm the pipe is open to full diameter. You see the before-and-after footage. We provide a written service summary and our drain clearing warranty.

Called about a kitchen drain that three other plumbers had snaked without long-term success. Masters Plumbing Service ran a camera first and found grease buildup 28 feet in, past where any hand snake reaches. Hydro-jetted it, re-scoped to confirm clean, and the drain has run perfectly in the months since.
All three bathrooms drained slowly and the lowest floor toilet gurgled every time an upstairs fixture ran — classic main line partial blockage. Masters Plumbing Service's tech accessed the cleanout, ran the camera, and found root intrusion at a clay tile joint about 40 feet from the house. He cut the roots with the root cutter attachment and re-scoped to confirm clear flow. Also noted a joint offset at 68 feet that we'll need to line eventually — good to know before it becomes a full backup.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Our drain technicians are based in and around Wallace to keep drive times short and same-day slots realistic. We cover residential and commercial properties across Wallace, NC.

Stop pouring chemicals down the drain and getting two-day results. Our drain techs in Wallace, NC use the right equipment to clear it properly and confirm it's clear on camera before we leave.
📞 Call +1-855-718-1500 Now